Search Results

Earlier papers by the principal author in conjunction with others have described the prediction of noise and performance characteristics of two-cycle spark-ignition crankcase compression engines. These calculations are performed on a digital computer and are shown to simulate accurately the unsteady gas flow and thermodynamic processes in such power units. The engines described previously had induction control by the piston or with a disc valve. In this paper the work is extended to engines fitted with reed valves controlling intake air flow and examples illustrating the effectiveness of such calculations are presented. In particular, a single-cylinder industrial engine is employed to show clearly the effects of changing such parameters as reed petal thickness, stop-plate radii and numbers of reed petals on the performance characteristics.

Previous publications from The Queen's University of Belfast have described the unsteady gas flow through a naturally aspirated two-cycle engine and the most recent of these have detailed the scavenge process, the combustion model and muffler design. It is thus now possible to predict the unsteady gas flow behaviour through and the performance and noise characteristics in this type of engine with a good degree of accuracy. This paper describes a mathematical model which has been formulated to simulate the action of the two-cycle engine fitted with a reed valve due to the unsteady gas dynamic behaviour in the inlet tract and makes comparisons with measurements. A complete simulation on the computer of a two-cycle engine fitted with a reed intake valve is thus now possible.

The theoretical modelling of the scavenge process for a naturally aspirated two-cycle engine is described and employed in conjunction with an unsteady gas dynamic analysis of flow in the engine ducting. Programmed for a digital computer, the results of this theoretical study are shown in relation to a 250 cm3 engine with values of predicted charging efficiency, scavenging efficiency, and delivery ratio given as a function of engine speed. These are compared with measured values of scavenging efficiency and the usual performance characteristics of power, mean effective pressure, delivery ratio, and specific fuel consumption. Also compared are the measured and predicted pressure diagrams taken in the cylinder, the crankcase, and the exhaust and inlet ducts. The design of a somewhat unique cylinder gas sampling valve of the mechanical type is described and its usage discussed both theoretically and practically.

Previous papers published by the author have described unsteady gas flow through a naturally aspirated two-cycle engine and the most recent of these publications details a theoretical modelling of the gas exchange or scavenge process for the cylinder of this type of power unit. This results in the ability to predict the trapped charge state, mass, and purity characteristics. With such information it becomes sensible to apply a closed cycle thermodynamic analysis to it and to further predict directly power, torque, and fuel consumption characteristics. This paper describes such a simple closed cycle analysis and compares the theoretical results of power, mean effective pressure, specific fuel consumption, and cylinder pressure diagrams with corresponding measured data from two engines.

The study of scavenge flow in two-cycle engines is of great importance in the development of that type of internal combustion engine and has been extensively covered by numerous researchers over the last half -century. Alfred Jante in SAE paper 680468 suggested an indirect and comparative test for the assessment of scavenge flow which he, and others, have shown to be both a simple and extremely relevant technique. The acquisition and reduction of data for this experimental method proved to be laborious and time consuming, and it is the purpose of this paper to show that it is possible to eliminate these tedious aspects by automation of both data recording and processing. This is described and examples of its usage are given.

This paper describes a theoretical and experimental investigation of the noise characteristics of some basic internal combustion engine exhaust systems. On the basis of a one-dimensional analysis of the unsteady internal flow, the treatment is extended to consider the noise radiated by the efflux of gas from the atmospheric termination of the tail pipe. Using a rotary valve exhaust simulator, experimental pressure-time histories and one-third octave noise spectrograms were obtained. These are compared with those calculated.

From a theoretical analysis of the unsteady efflux from the open end of a simulated reciprocating internal combustion engine exhaust system a prediction of overall and one-third octave sound pressure levels in space, due to this gas flow, is produced. The predictions are compared with measured levels and show a high degree of correlation.

The performance characteristics of a naturally aspirated two-cycle engine can be predicted with an unsteady gas dynamics analysis of flow through the crankcase and cylinder; such an analysis provides values of volumetric efficiency and trapping pressure at any given engine speed. The predictions of the volumetric efficiency and trapping pressure are compared with experimental values from a high-specific-output engine and further amplified with theoretical/experimental comparisons of pressure-time histories taken in the exhaust, transfer, and inlet systems at several engine speeds. The theoretical derivation of unsteady gas dynamic cylinder to pipe boundary conditions is presented so that they become both economical of computer time and mathematically stable.

A computer program has been developed which predicts the sound pressure level and the frequency spectrum produced by simple engine exhaust systems. The program utilizes unsteady flow gas dynamic theory to predict the pressure-time history in the exhaust system and the velocity-time history at the open end of the system. Acoustic theory is then used to predict the sound pressure levels and frequency spectrum in free space. The work was carried out on a twin-cylinder four-cycle engine, but the theory can be applied to any internal combustion engine.

This paper describes the initial investigation and design of a lightweight racing motorcycle with a single-cylinder 2-stroke engine, capable of producing 60 bhp. The data discussed here pertain to the gas dynamic and mechanical parts and functions of the cycle. Designs of the various components are described and reports of tests on road and test beds verify the viability of this concept of a high specific output and large displacement cylinder for a lightweight, air-cooled motorcycle engine.

Pressure-time variations are recorded in the intake pipe and crankcase of a motored, crankcase compression, piston ported, loop scavenged two stroke cycle engine over a range of engine speeds from 2000-7000 rpm, for several intake pipe lengths and different inlet port timings. These pressure-time histories are presented together with the results of theoretical calculations, which include unsteady flow in the induction tract. Predicted delivery ratio trends are compared with measured values over the range of engine speeds and inlet tract lengths for different inlet port timings.

Modern turbocharged diesel engines employ exhaust driven turboblowers operating at high speeds up to 100,000 rpm. The performance assessment of such units demands precise and controllable power absorption and torque measurements at these very high rotational speeds. Additionally the parameters, speed, mass flow, static and dynamic pressures and temperatures must be measured. The turbine power absorption and torque measutement present unique problems. The remaining parameters may present some difficulties but generally the problems are not so great. The design of a high speed dynamometer and the development problems encountered are described. The dynamometer has been used to establihs the performance characteristics of a C. A. V. 01 turbocharger and these are reported.

This paper attempts to illustrate some of the reflection characteristics of exhaust systems, suitable for piston ported, crankcase compression, naturally aspirated two-cycle engines. In particular, the application is even narrower, being concerned principally with those engines of the spark ignition, gasoline burning type where a high bmep is desirable. The two principal exhaust systems considered are the diffuser and the expansion chamber. Both are analyzed experimentally and theoretically and presented as measured and digitally computed pressure-time diagrams in simulated and actual engine exhaust systems. These are compared and discussed.

Measurement of pressure-time histories in the exhaust system of a naturally aspirated internal combustion engine poses some difficult instrumentation problems. This paper describes an experimental and theoretical approach in tackling this research. The exhaust system is simulated by pulses of compressed air at a frequency of up to 4000 pulses/minute, that is, a 1 cyl 4 stroke cycle engine running at 8000 rpm. The pressure-time histories are calculated by digital computer in terms of the cylinder, exhaust valve, and pipe friction characteristics and compared with the experimental pressure-transducer records at various positions in the exhaust system.

The outflow of the products of combustion from a two-stroke cycle diesel engine cylinder is examined and the numerical analysis used hitherto supplanted by a direct integration method. It is found that the equations of outflow result in a nonlinear differential equation capable of direct solution, thereby giving rapid computation of the exhaust lead, one of the most important single criteria of the overall engine design.